Firetide HotPoint 4000 Wireless Access Point
|
KEY FEATURES |
| Seamless Outdoor and Indoor Operation | |
| Access On or Off the Mesh | |
| Modularity for Flexible Placement | |
| Single-point Network Management for Mesh and Access | |
| Advanced Security and Performance Features | |
| Designed for Hot Spots |
| DESCRIPTION |
Firetide HotPoint wireless access points deliver a modular access solution for large scale, indoor and outdoor wire less mesh networks. Modular design enables full network and software in te gra tion of the access points with a Firetide wireless mesh network while at the same time permitting independent physical placement of the hardware to provide optimal accessibility for Wi-Fi clients. Outdoor HotPoint 4600 access points have rugged NEMA 4X/IP67-rated cast aluminum en clo sures and have one weather proof connector for attaching to a Firetide wireless mesh node or a conventional Ethernet port. These units support high gain antennas and can receive power directly from a connected mesh node eliminating the need for an external power supply. Indoor HotPoint 4500 access points provide wireless access within buildings and moving vehicles. Each indoor access point has a UL2043 plenum-rated enclosure and an RJ-45 connector for attaching to a Firetide wireless mesh node or a conventional Ethernet port. |
| SPECIFICATIONS | |
| Wireless interface | IEEE 802.11b/g |
| Frequency range: 2.400 - 2.484 GHz | |
| Transmit power up to 400 mW | |
| Manual Transmit Power Control | |
| 802.11d (Auto Channel Select) | |
| Typical RX sensitivity – 2.4 GHz, DSSS (1 Mbps: -96 dBm, 11 Mbps: -90 dBm) / 2.4 GHz, OFDM (6 Mbps: -93 dBm, 54 Mbps: -74 dBm) | |
| Media Access Protocol: CSMA/CA with ACK | |
| Range up to 1000 meters depending on client configuration and environment | |
| Networking | Up to 16 SSIDs per HotPoint |
| Up to 16 independent VLANs | |
| DHCP client and server, separate DHCP range per SSID | |
| WDS (Wireless Distribution System) | |
| Security, Authentication and Encryption | 802.11i, WPA2 |
| 40 bit, 104 bit WEP keys | |
| 128 bit, 256 bit AES keys | |
| 802.1x, RADIUS authentication | |
| VPN tunneling and filtering | |
| SSID suppression | |
| Firewall | |
| MAC access control | |
| NAT | |
| Rogue AP detection | |
| Management and Configuration | Integrated mesh and access management |
| Multiple user interface options: Centralized management via HotView or HotView Pro Built-in web-based management Command line interface (CLI) |
|
| Remote firmware upgrade | |
| Auto AP discovery | |
| Physical AP grouping | |
| Hot Spot Services | Virtual AP Grouping |
| User-based rate limiting | |
| Intercell/intracell blocking | |
| Client Access Features | Up to 64 concurrent users simultaneously per HotPoint |
| Inter Access Point Protocol (IAPP) enabled per 802.11f | |
| Fast handoff enabled | |
| 108 Mbps Turbo Mode | |
| 802.11e (WMM) (Quality of Service) | |
| Zero user configuration | |
| Network Ports | One 10/100 autosense Base-T port |
| IEEE 802.3,802.3u compliant | |
| HotPoint Management Software | HotView™ mesh management software (bundled) |
| HotView Pro™ mesh management software (optional) | |
| Regulatory Agency Certifications | FCC Part 15 |
| CE | |
| Warranty | Hardware: one year limited warranty |
| Software: 90 days limited warranty | |
| OUTDOOR MODEL | INDOOR MODEL |
| Enclosure | |
| System indicator LEDs (power, status, access) | System indicator LEDs (power, status, access) |
| Antenna connector: N female (quantity 2) | Ethernet indicator LED (activity) |
| IP67-rated power connector | Antenna connector: SMA reverse polarity female (quantity 2) |
| IP67-rated Ethernet data connector | Power connector (2.1 mm, center positive) |
| Mounting bracket kit for polemount or wall attachment | Ethernet data connector (RJ-45) |
| Weight: 4.8 lbs (2.2 Kg) without external power supply | Reset button (recessed) |
| Dimensions: 27.9 cm x 21.6 cm x 5.1 cm | Security slot for physical locking device |
| NEMA 4X/IP67 | Weight: 1.0 Kg without external power supply |
| Dimensions: 22.9 cm x 14.8 cm x 2.8 cm | |
| UL2043 Plenum-rated | |
| Power | |
| Input voltage: 12-18 VDC via external power supply (16 VDC nominal) or PD/POE capable on Ethernet data connector | Input voltage: 5 VDC via external power supply |
| External power supply: 100-240 VAC, 50/60 Hz (not included) | External power supply:100-240 VAC, 50/60 Hz |
| Power consumption: 9-11 W, depending on configuration | Power consumption: 8-10 W, depending on configuration |
| Antennas and Cable Assemblies (Not Included) |
Antennas (Included) |
| 7.4 dBi omni directional antenna | Two 2.4 GHz antennas provided with each unit |
| 8.0 dBi omni directional antenna | Pattern: Omni directional, vertical polarization |
| 1.5 m LMR400 cable with low loss lightning suppressor | Connectors: SMA, reverse polarity |
| 5 m LMR400 cable with low loss lightning suppressor | Length: 15.5 cm |
| Gain: up to 5 dBi | |
| Optional Accessories | |
| — | Mounting kit for secure wall, ceiling, tabletop, or cubicle installation |
| Environmental Specifications | |
| Operating temperature: -20 ºC to +55 ºC | Operating temperature: 0 ºC to +50 ºC |
| Storage temperature: -40 ºC to +70 ºC | Storage temperature: -20 ºC to +70 ºC |
| Humidity (non-condensing): 10% to 90% | Humidity (non-condensing): 10% to 90% |
| Storage humidity (non-condensing): 10% to 90% |
Storage humidity (non-condensing): 10% to 90% |
| PART NUMBER | |
| HotPoint 4500 Indoor Access Point | 4500 |
| HotPoint 4600 Outdoor Access Point | 4600 |
| Accessory Kit Bundle for Stand-alone HotPoint 4600 | 4000-2000 |
